Product description
Visual performance
Much of what drives the Parallax jacket is how it looks. It’s about visual performance. We use a highly abrasion-resistant cow leather – along with artificial nubuk - for its outer shell construction; giving it that distressed look from the get-go. Yet, over time, will become more worn-in and mold to the contours of your body.
Street performance
A good-looking jacket would be nothing in our lineup without the street cred to back it up. Included is interior armor at the shoulders and elbows, along with TPU external hard parts at the shoulders. Making the Parallax jacket more than just a one-season use jacket is the inclusion of the detachable body warmer and the wind catcher behind the front zipper.
Highlights
SEESMART CE-level 1 protection
Detachable thermal body warmer
Prepared for SEESOFT CE-level 2 back protector insert
Prepared for divided SEESOFT CE-level 1 chest protector
Short and long connection zipper
Jeans loop
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Extra information
Ventilation
Perforation on upper front
Insulation
Detachable thermal body warmer
Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Wind catcher behind cuff zipper
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector
The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
SEESMART CE-level 1 Elbow Protectors
SEESMART elbow protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Visibility
Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.
Adjustability
Adjustment strap at waist
Pockets
Slit pocket at waist
Inner napoleon pocket
Three inner pockets
Protective features
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
TPU protection at shoulder
Fit
Tight fit
The Tight fit is designed to be snug and conform to the rider's body shape. The contouring design ensures that the material and fabrics move with the body, without restricting the range of motion in any situation. This fit is mostly found in base layers and in our race-oriented garments.
Features
Long connection zipper
The long connection zipper is the longer, more secure choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Comfort cuffs
Cuff zipper
The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.
Stretch at shoulders
Soft edge at collar
For extra comfort, the inside of the collar is covered with a soft fabric.
Stretch at waist
Stretch at inside arms
Stretch at armholes
Stretchable cuff
Outer shell
cowhide
Cowhide has been used in this garment for optimal fit and protection.
