Jacket Tornado 3

Detachable 2-in-1 thermal liner & membrane

In these garments we have added a thermal liner to the detachable hydratex® | G-liner. This becomes one layer that can be easily removed on warm, dry days, and easily added when you need protection from the rain and cold.

Detachable hydratex|Lite 2-in-1 liner

This garment has a detachable hydratex|Lite 2-in-1 liner, providing waterproofing as well as insulation. Riders stay dry and warm with this feature.

Prepared for SEESOFT CE-level 2 Insert Back Protector

The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

Prepared for SEESOFT CE-level 1 Divided Insert Chest Protector

The protector pocket in this REV'IT! garment is tailor-made to accommodate the Divided Chest Protector SEESOFT CE-level 1 - an easy upgrade to maximize safety.

SEEFLEX CE-level 2 Elbow Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

SEEFLEX CE-level 2 Shoulder Protectors

Certified CE-level 2 according to the new norm EN 1621-1:2012 the SEEFLEX protector is the latest innovation from the in-house R&D department. The new norm also tests the impact levels in various temperature ranges. The SEEFLEX protectors easily surpass the new norm without sacrificing wearer comfort.

Ready for Avertum Tech-Air® airbag system - ONE SIZE UP

Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Laminated reflection at chest

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection at upper arms

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection on back

Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Laminated reflective logo on back

This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

Fully ventilated mesh

Adjustable elbow protection

The adjustable elbow protection pockets allow you to tailor the CE-rated elbow protection to three different heights to perfectly fit your body and for optimal comfort while riding.

Adjustment strap at lower arm

Adjustment strap at waist

Adjustment tab at upper arm

Flexisnap at collar

The REV’IT! flexisnap makes it possible to adjust the collar circumference easily and personalize its fit to each rider. A jacket is often worn in more then one season, and the flexisnap makes it possible to adjust the collar within seconds. During winter a wider collar circumference accommodates combining the jacket with a balaclava or wind collar, while during summer, a wider circumference lets an all-important cooling wind into the collar.

Adjustment tab at cuffs

Two slit pockets on front

Two inner pockets

Waterproof inner pocket within waterproof liner

The internal pocket within the waterproof liner is waterproof.

Regular fit

The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

Short connection zipper

The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.

Short connection zipper in detachable waterproof liner

Adding to the versatility of the waterproof detachable liner, it comes with a short connection zipper, allowing you to securely fasten it to your riding trousers (or jeans via the Safeway 2 belts), when possible.

Separately wearable hydratex|Lite 2-in-1 liner

This hydratex|Lite 2-in-1 liner has been two functions. It protects against the wind and cold when zipped into a garment but can also be worn as a jacket by itself, providing the same functionality, reducing the need for additional layers when riding.

Cuff zipper

The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.

Stretch lips at elbows

Two-way Collar Snap Closure System

The two-way collar snap closure system works to close the collar in inclement weather and also flips back and reverses to use the same snap closure to keep the collar open and out of the way to allow in fresh air.

PWR|Shell 750D

Consisting of 100% high-performance polyamide yarns, PWR|Shell 750D takes the best properties of a nylon with a high melting point, tremendous tear and abrasion-resistance, and excellent durability and then puts the unique REV’IT! design stamp on it. It provides high-performance protection for every rider.

PWR|Wax 500D

This PWR|Shell material has a wax coating for a slightly dull look.

3D air mesh

This knitted fabric has an open, 3-dimensional structure that ensures good ventilation while riding. 3D air mesh is a must-have for long touring riders.

PWR|Shell mesh

This PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.

Polyester ripstop

Artificial Leather

A sythetic version of leather with a similar look.