Product description
Where Adventure and Heritage meet
Combining features we use in one segment into another is not unknown at REV’IT!. So when we took the idea of an inner lining ventilation panel that can be opened and closed – currently used in our Offtrack (Adventure) jacket - and put it into the Morgan, it made total sense. The inside of the jacket is lined with a windstopper material, but open the custom made, lasered ventilation panels, and air can freely flow to the body. That’s also thanks to the perforated full-grain cowhide panels at the front.
Keeping it classy
With a high collar, a wider-in-the-shoulders and tapered-toward-the-waist fit, and seamlessly integrated slit pockets at the sides, the Morgan jacket ticks all the boxes when it comes to being classy without shouting too loudly. Furthermore, its CE AA classification, included SEESMART elbow and shoulder protection, and safety seams help to keep you looking good and staying protected on the road.
Highlights
SEESMART CE-level 1 protection
Prepared for SEESOFT CE-level 2 back protector insert
Fold-down ventilation panel
Detachable thermal body warmer
Short connection zipper
Jeans loop
Extra information
Insulation
Detachable thermal body warmer
Wind catcher behind front zipper
Behind the front a panel has been installed to block the wind.
Wind catcher behind cuff zipper
Internal windblocking window
Because of this garment’s inherent ventilated nature, it also contains the unique internal windblocking window to keep the cold out on chillier rides. In warmer temperatures, simply unzip the side of the wind-blocking panel/window, roll it down, tuck it into its own pocket, and ride on. When it gets colder, simply close it, like you would with a window. A smart solution to have generous on-demand ventilation and wind blocking.
Protection inserts
Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
SEESMART CE-level 1 Shoulder Protectors
SEESMART shoulder protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
SEESMART CE-level 1 Elbow Protectors
SEESMART elbow protectors offer the highest level of flexibility while still passing the EN 1621-1:2012 CE-level 1 impact tests, in both normal and hot (T+) conditions.
Ready for Avertum Tech-Air® airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air® Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ""Ready for Avertum Tech-Air® airbag system"", you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.
Adjustability
Adjustment strap at waist
Pockets
Slit pocket at waist
Inner pocket
Protective features
Safety seams
The stitching in motorcycle garments contributes greatly to the abrasion resistance of the total gear. This is why REV'IT! uses safety seams on garment areas at increased risk of impact. Safety seams have a visible as well as an invisible seam. This construction keeps the material of the outer shell together, even when the visible seam is thorn.
Fit
Slim fit
The Slim fit is designed to enhance the body's natural physique, creating a sleek and sophisticated look. It features a closer cut that is more tailored and slenderer, emphasizing specific areas of the body. Despite its slimmer profile, the Slim fit still provides ample comfort and freedom of movement where it's needed.
Lining
3D mesh
Mesh
Polyester ripstop
Polyester ripsotp is a lightweight fabric with special fibers used within the weave at specific points, allowing for the fabric to have strong resistance against further tears.
Features
Short connection zipper
The short connection zipper is the shorter, simpler and quicker choice of our two connection zipper options. It lets you zip the motorcycle jacket and motorcycle pants together as one. For comfort and for safety.
Jeans loop
The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up: no more exposed back when riding your bike.
Cuff zipper
The zipper at the cuff allows for easier entry into the sleeve and lets you wear the glove cuff under your outer shell and over your base layer.
Wind collar tab
Outer shell
full grain soft cowhide
Ventilation
Ventilation panel on center front
Visibility
Reflective label at back
Retroreflective, fluorescent label at the back to aid visibility and improve safety in low-light situation.
